Power Grid Steel Poles
Tapered steel poles for transmission and distribution lines.
- Pole types
- Transmission · distribution · substation
- Design standard
- ASCE/SEI 48, to utility loading
- Steel
- IS 2062 E350 / E450 · ASTM A572 Gr 65
- Shaft
- Tapered polygonal (8, 12, 16-sided) or round
Overview
We manufacture tubular and polygonal steel poles for transmission, sub-transmission and distribution lines, built to the utility's design and loading. Shafts are brake-formed from plate, seam-welded, fitted with base plates, arms and attachments, and hot-dip galvanized for long outdoor life.
Our capabilities
- 01Tapered polygonal poles: 8, 12 and 16-sided
- 02Transmission, distribution and substation poles
- 03Slip-joint and flange-joint sections
- 04Base-plated and direct-embed designs
- 05Anchor bolt cages and templates
- 06Cross-arms, davit arms, vangs and step bolts
- 07Longitudinal seam welding with weld NDT
- 08Hot-dip galvanizing after fabrication
Technical data
| Pole types | Transmission · distribution · substation |
|---|---|
| Design standard | ASCE/SEI 48, to utility loading |
| Steel | IS 2062 E350 / E450 · ASTM A572 Gr 65 |
| Shaft | Tapered polygonal (8, 12, 16-sided) or round |
| Joints | Slip joint (min. lap 1.5 × female diameter) · flange |
| Foundation | Base plate with anchor bolt cage · direct embed |
| Welding & NDT | Welders qualified to ASME Section IX / EN ISO 9606; ultrasonic testing of full-penetration welds |
| Finish | Hot-dip galvanized to IS 4759 / ASTM A123 |
Values reflect common industry practice and referenced standards. Final values are set by your drawings and specification.
Our project approach
- 01
Submit drawings & specs
Send your drawings, specifications and quantities. DXF, DWG, STEP or PDF.
- 02
Proposal
A clear technical and commercial proposal with price, scope and delivery date.
- 03
Manufacturing
Fabrication, finishing and inspection to the agreed quality plan.
- 04
Dispatch & site support
Packed and dispatched by road across India or crated for export, with erection and commissioning support at site.
FAQs
Where are the parts made?
At our own plant in GIDC Makarpura, Vadodara, Gujarat. Engineering, the tool room, fabrication, machining, finishing and testing all happen on the same site.
Who do I deal with?
Our engineering team is your single point of contact, from quote to delivery and after-sales service.
What files do you accept?
DXF, DWG, STEP and PDF drawings. We can also work from sketches or samples through our design service.
Can we inspect parts before dispatch?
Yes. Your inspectors or a third-party inspection agency are welcome at the plant for stage and final inspection.
What are typical lead times?
Lead time depends on the part, quantity and material availability. Every quote states a firm delivery date.
Request a quote
Send your drawings and specifications. Our engineers will reply with a detailed proposal.